Restore your Holosun EPS Carry Red Dot Sight

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected performance. Fortunately, resetting your Holosun is a easy process that can be performed in just a few procedures.

First ensuring your red dot sight is turned on.
Find the small reinitialize button on the side of the unit.
Employ a paperclip to press and hold the reset switch for approximately 5 moments.
Disengage the lever and your Holosun EPS Carry Red Dot sight will power cycle.
The red dot sight should now be set back to its factory settings.

Return to Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to default configuration is a breeze. First, determine the tiny button on the bottom of your optic. Then, keep pressed it for around ten seconds until you see the red dot blink. Your Holosun EPS Carry is now returned to its factory settings, ready for precise aiming.

Bring Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

Simultaneously press and hold the power button for approximately 7 seconds.
The display will flash, indicating that the reset is successfuly initiated.
Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and confirm your sight's functionality. If you encounter any further problems, don't hesitate to seek help from Holosun's support.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

Initially, Turn on your Holosun EPS Carry by pressing the power button.
Next, press and hold both the mode button and the up/down adjustment button simultaneously.
During continue holding these buttons, press the power button once.
You will show a confirmation prompt indicating that the reset process is initiated.
Permit the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select get more info this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Restore your Holosun EPS Carry via a Factory Standard Settings

If your Holosun EPS Carry is acting up, a factory reset might be the solution. This will restore your sight to its factory settings, clearing any altered configurations you've made. To accomplish this reset, adhere to these simple steps:

To begin, locate the reset button on your EPS Carry.
Secondly, use a fine object, like a toothpick, to push the reset switch.
During maintain the reset lever activated, turn your EPS Carry.
The sight will display a message confirming that the reset is finished.

Once the reset is complete, your EPS Carry will be back to its factory settings.